Several states have already updated their legislation in recent years to address the rise of self-driving trucks. For instance, South Dakota created a framework enabling fully autonomous trucks to operate without an onboard human operator in 2024. Similarly, Arkansas and Mississippi revised their rules in 2023 to permit truck platoons—without human drivers in trailing vehicles.

The Owner-Operator Independent Drivers Association (OOIDA), while acknowledging the potential of autonomous technologies, has voiced concerns regarding their implications for highway safety and commercial transportation.

Delaware

Lawmakers in Delaware are tackling the issue of testing autonomous trucks without human safety operators. A similar bill introduced in the 2024 session aimed to ban autonomous trucks over 10,000 pounds from public roads. Although it passed the Senate unanimously, it failed to gain traction in the House.

Fast forward to 2025, Sen. Spiros Mantzavinos, D-Newport, has introduced SB46, an almost identical bill. This version raises the weight limit to 26,000 pounds and includes provisions that prohibit autonomous trucks from testing, transporting goods, or carrying passengers without a human driver present. It also allows testing with a driver onboard and requires the Delaware Department of Transportation to submit a report evaluating this technology by 2030, which could lead to rule adjustments.

Unsurprisingly, some in the autonomous vehicle industry argue this legislation “preemptively and prematurely” restricts progress in Delaware.

Indiana

Indiana lawmakers are also discussing autonomous trucking with measures aimed at putting clear guidelines in place. Currently, Indiana law does not specify whether a human driver is required in automated vehicle platoons.

A proposed bill, HB1057, would mandate that autonomous tractor-trailers used for goods or passenger transport must have a qualified human driver physically in the vehicle. Sponsors of the bill, such as Rep. Cindy Ledbetter, R-Newburgh, have emphasized safety concerns, stating automated trucks without drivers could lead to accidents caused by technological failures.

HB1057, along with a similar bill, HB1377, is currently under review in the House Roads and Transportation Committee.

Maryland

Maryland legislators are discussing similar restrictions on autonomous vehicles. HB439, introduced in the House, proposes banning autonomous vehicles weighing over 10,000 pounds from operating on state highways for testing, goods transport, or passenger services—unless a human driver is present. The bill also outlines a requirement for the Maryland Motor Vehicle Administration to report by 2030 on the technology’s safety, impacts on jobs, and infrastructure, as well as whether the restrictions should be maintained, modified, or removed.

HB439 will be reviewed by the House Environment and Transportation Committee during a scheduled hearing on February 6, while the Senate will concurrently consider SB405.

Montana

Montana lawmakers are initiating discussions on regulating autonomous truck platoons. Currently, no rules exist for platooning in the state.

Rep. Zack Wirth, R-Wolf Creek, has introduced HB97, which seeks to authorize truck platooning on Montana highways under specific conditions. For instance, the lead vehicle “conductor” must have a commercial driver’s license (CDL) and be able to take manual control if necessary. Platooning would be limited to three trucks in a group and restricted primarily to interstate highways or within a short distance from interchanges for loading and unloading.

The Montana Department of Transportation (MDT) would be tasked with creating safety-focused rules and coordinating with stakeholders, including trucking industry representatives. The department could also impose limitations on platooning during hazardous road conditions and issue special permits based on the finalized safety standards. The MDT highlights that while truck platooning offers economic and transportation benefits, it also introduces significant challenges.

Virginia

Virginia lawmakers are also considering policies for fully autonomous trucks. Legislators have proposed HB2627, a bill allowing autonomous vehicles, including those over 62,000 pounds, to operate in the state. However, the legislation mandates that a human driver with proper credentials must be physically present and capable of taking control if necessary.

The bill is currently under review by the House Transportation Committee.

Source: Land Line

The post Autonomous Truck Regulations Debated Across Five States appeared first on Truck Drivers USA.

In Indiana, there is a notable speed limit differential for cars and trucks, with cars allowed to travel at 70 mph on major roadways, while vehicles weighing over 26,000 pounds are limited to 65 mph. Efforts to eliminate this speed limit disparity in rural areas have been ongoing, as demonstrated by Rep. Mike Aylesworth’s pursuit with bill HB1055.

He feels a rule revision is necessary in Indiana “to correct a law that is flawed in nature and does nothing to improve highway safety.”

Despite consideration in the House Roads and Transportation Committee, the bill did not progress to a vote, facing opposition from the Indiana Motor Truck Association. Supporters argue that uniform speed limits enhance traffic flow, referencing a study by the Indiana Department of Transportation and Purdue University indicating a potential 20% reduction in crash frequencies with uniform 70 mph speed limits.

Maryland, too, is undergoing potential changes to speed limit rules. A bill, HB278, aims to empower the Maryland State Highway Administration to decrease maximum speeds by 5 mph on urban state highways without necessitating a traffic or engineering study. The bill, approved by House lawmakers, is set to proceed to the Senate Judicial Proceedings.

In Michigan, the Senate Transportation and Infrastructure Committee has advanced HB4012, addressing perceived flaws in how the state establishes local roadway speed limits. Sponsored by Rep. Bradley Slagh, the bill aims to provide flexibility in applying the 85th percentile speed rule, allowing the rounding down of speeds when necessary. The legislation seeks to eliminate the requirement for an engineering and safety study, relying on traffic engineering practices for objective analysis. The bill awaits further consideration on the Senate floor.

In New Jersey, Sen. Declan O’Scanlon sponsors S1652, a bill proposing the use of the 85th percentile formula to set speed limits on limited access highways.

“[The change would result in] the smoothest, safest level of traffic flow and inflict the least amount of arbitrary punishment on people behaving reasonably,” he said.

This approach, if approved, would allow the New Jersey Department of Transportation and other state traffic agencies to employ studies for determining speed limits.

New York is also in the midst of potential speed limit changes. Bills in the Assembly and Senate propose raising the speed limit from 65 mph to 70 mph on interstate highways and other limited access roads, aligning New York with the speeds permitted in many other states.

“The majority of states across the country have state speed limits that exceed 65 mph,” said Tom O’Mara, New York. “New York has failed to keep up with the rest of the country by not adopting a more efficient speed limit. … [My bill] would correct this inefficacy by allowing for a 70 mph speed limit where appropriate.”

Lastly, in Oklahoma, Rep. Ross Ford sponsors HB3894, which seeks to implement a 65 mph minimum speed limit on rural interstate highways, where current speed limits are set at 75 mph, and on Oklahoma turnpikes, where speeds are set at 80 mph.

Source: Land Line

The post Speed Limits Could Change in Some States appeared first on Truck Drivers USA.

Gone are the days of a simple office trailer. Originally built in 1996, the Conowingo Truck Weigh and Inspection Station has received a major facelift. This state-of-the-art facility underwent geometric and technology improvements to ensure it meets the highest industry standards.

After a brief closure in December 2020, the new weigh station was completed in July and is now fully operational as of Wednesday, September 6th.

“The renovations to this critical asset along US 1 will improve overall operational efficiency and accessibility for commercial trucks,” State Highway Administrator William Pines said. “With this new facility, we also will improve safety for motorists who travel the corridor in non-commercial vehicles.”

Updates to the truck inspection and weigh station include:

• Enhanced accessibility and traffic flow with a wider entrance
• Accommodation for wide loads with a new scale boasting a maximum clearance of 14 feet
• Streamlined truck access to the inspection pit and work shed
• Spacious new scale house featuring an industrial-grade roof and high-grade windows
• Upgraded Intelligent Transportation Systems equipment, including LED signs, CCTV cameras, and lane use signs
• Ample parking for trucks declared out of service due to safety concerns
• Convenient employee and visitor parking near the scale house
• Improved site drainage to meet current standards
• Enhanced security with photocell-equipped light poles in the parking lot

“Scale houses are more than checkpoints on our highways. They play a vital role in ensuring the efficiency and safety of commercial vehicles,” said Maryland State Police Lt. Col. Dan Picket, Chief of Field Operations Bureau. “Maintaining our weigh and inspection stations protects not only the drivers of trucks and buses, but also all motorists traversing Maryland roadways.”

To learn more about Maryland’s Weigh and Inspection Station Program, and to access a comprehensive list of all stations in the state, click HERE.

Source: Truckers News

The post Maryland Unveils New State-of-the-Art Scale House on US 1 in Darlington appeared first on Truck Drivers USA.